DC Circuit Breaker MCB SPD

  • 1000V 32A Waterproof DC Isolator Switch SISO for Solar PV Array

    1000V 32A Waterproof DC Isolator Switch SISO for Solar PV Array

    1000V 32A Waterproof DC Isolator Switch SISO for Solar PV Array are designed with safely in mind In stand-alone and enclosed formats,this switch range are padlockable and available to make it ideal for any electrical isolation requirement,such as repair,maintenance installation and inspection.
  • DC Breaker Electric Car Miniature Circuit Breaker DC 12V to 125V 150A 200A 250A Mini MCB 1P 2P MCB

    DC Breaker Electric Car Miniature Circuit Breaker DC 12V to 125V 150A 200A 250A Mini MCB 1P 2P MCB

    Risin Battery Car MCB DC Circuit Breaker 250A 200A 150A 100A 80A Power switch protector For Motorcycle And generator,dedicated to the electric motorcycle, and mainly used for over-load and short-circuit protection in DC circuits with rated voltage of DC 12V-125V for single-pole and rated current of 63A and 125A. In normal condition, it can switch infrequently the electric equipments and lighting circuits. This RKB1/DC type B Circuit Breaker complies with the standards of GB10963.1 and IEC60898-1. RKB1/DC MCB Special Circuit Breaker is specially used for electric motor vehicles and battery car and solar battery storage protection etc. .

  • IP66 Waterproof Power Distribution Box Circuit Breaker Enclosure Weatherproof Enclosure

    IP66 Waterproof Power Distribution Box Circuit Breaker Enclosure Weatherproof Enclosure

    IP66 Power Distribution Box Circuit Breaker Enclosure Weatherproof Enclosure are vitally important party of any solar installation,if you are using DC circuit breaker as isolation.This IP66 Distribution Enclosure Box are designed to house arrange of DIN rail circuit breakers are complete with a soring loadedlockable lid.It also has top ,bottom and rear cable entry.
  • Solar PV Circuit Breaker DC1000V DC550V DC800V DC MCB 6A to 63A

    Solar PV Circuit Breaker DC1000V DC550V DC800V DC MCB 6A to 63A

    Solar PV Circuit Breaker DC1000V DC500V DC800V DC MCB 6A to 63A are designed to provide overcurrent protection within appliances or electrical equipment, where a branch circuit protection is already protection or not required. Devices are designed for direct current (DC) control circuit applications in Solar PV Systems.
  • 1000V Solar Outdoor Power Protection Device Surge Arrester DC SPD

    1000V Solar Outdoor Power Protection Device Surge Arrester DC SPD

    1000V Solar Outdoor Power Protection Device Surge Arrester DC SPD (in short DC SPD,alias,surge suppressor,surge arrester)is suitable for TN-S, TN-C-S, TT, IT etc, the power supply system of AC 50/60Hz. When the SPD fails in breakdown for over heat or over-current, the failure release will help electric equipments separate from the power supply system and give the indication signal, it also could be replaced for the module when has operating voltage in Solar PV Systems.
  • 550V 750V 1000V 125A 160A 250A DC MCCB Moulded Case Circuit Breaker

    550V 750V 1000V 125A 160A 250A DC MCCB Moulded Case Circuit Breaker

    FPVM DC MCCB Moulded Case Circuit Breaker is designed to distribute power and protect the circuit and power equipment against overload in solar system. It is apply to rating current 1250A or less,direct current rating voltage from 550VDC,750VDC,1000VDC and 1500VDC. Our DC MCCB according IEC60947-2, GB14048.2 standard.

Send your message to us:

Write your message here and send it to us