Solar Circuit Breaker SPD

  • IP66 Waterproof Power Distribution Box Circuit Breaker Enclosure Weatherproof Enclosure

    IP66 Waterproof Power Distribution Box Circuit Breaker Enclosure Weatherproof Enclosure

    IP66 Power Distribution Box Circuit Breaker Enclosure Weatherproof Enclosure are vitally important party of any solar installation,if you are using DC circuit breaker as isolation.This IP66 Distribution Enclosure Box are designed to house arrange of DIN rail circuit breakers are complete with a soring loadedlockable lid.It also has top ,bottom and rear cable entry.
  • 2P 30mA 63A ELCB RCCB RCD Residual Current Circuit Breaker

    2P 30mA 63A ELCB RCCB RCD Residual Current Circuit Breaker

    RCB RCCB is Residual Current Circuit Breaker ,ELCB is Earth Leakage Circuit Breaker,which is applicable to electric circuits with rated voltage 230/400V AC, frequency 50/60Hz and rated current from 16Amp to 125Amp.
    RCCB ELCB RCD provides indirect protection to the operator's body under such condition that the exposed live partsshould be connected to a proper earthing pole.RCCB also provides protection against the fire danger caused by earth fault current due to function failure of over-current protection device.
  • Solar PV Circuit Breaker DC1000V DC550V DC800V DC MCB 6A to 63A

    Solar PV Circuit Breaker DC1000V DC550V DC800V DC MCB 6A to 63A

    Solar PV Circuit Breaker DC1000V DC500V DC800V DC MCB 6A to 63A are designed to provide overcurrent protection within appliances or electrical equipment, where a branch circuit protection is already protection or not required. Devices are designed for direct current (DC) control circuit applications in Solar PV Systems.
  • 1000V Solar Outdoor Power Protection Device Surge Arrester DC SPD

    1000V Solar Outdoor Power Protection Device Surge Arrester DC SPD

    1000V Solar Outdoor Power Protection Device Surge Arrester DC SPD (in short DC SPD,alias,surge suppressor,surge arrester)is suitable for TN-S, TN-C-S, TT, IT etc, the power supply system of AC 50/60Hz. When the SPD fails in breakdown for over heat or over-current, the failure release will help electric equipments separate from the power supply system and give the indication signal, it also could be replaced for the module when has operating voltage in Solar PV Systems.
  • 1000V 32A Waterproof DC Isolator Switch SISO for Solar PV Array

    1000V 32A Waterproof DC Isolator Switch SISO for Solar PV Array

    1000V 32A Waterproof DC Isolator Switch SISO for Solar PV Array are designed with safely in mind In stand-alone and enclosed formats,this switch range are padlockable and available to make it ideal for any electrical isolation requirement,such as repair,maintenance installation and inspection.
  • AC Miniature Circuit Breaker 63 Amp 1P 2P 3P 4P AC MCB

    AC Miniature Circuit Breaker 63 Amp 1P 2P 3P 4P AC MCB

    AC Miniature Circuit Breaker 63 Amp 3 Phase MCB are designed to provide overcurrent protection within appliances or electrical equipment, where a branch circuit protection is already protection or not required. Devices are designed for direct current (AC) control circuit applications in Solar Power Systems.
  • Solar Power Surge Protection Device 60KA AC Surge Lighting Arrester SPD

    Solar Power Surge Protection Device 60KA AC Surge Lighting Arrester SPD

    Solar Power Surge Protection Device 60KA AC Surge Lighting Arrester SPD (in short AC SPD,alias,surge suppressor,surge arrester)is suitable for TN-S, TN-C-S, TT, IT etc, the power supply system of AC 50/60Hz,<380V. When the SPD fails in breakdown for over heat or over-current, the failure release will help electric equipments separate from the power supply system and give the indication signal, it also could be replaced for the module when has operating voltage in Solar PV Systems.
  • 125A 160A 250A 3 Pole AC MCCB Moulded Case Circuit Breaker

    125A 160A 250A 3 Pole AC MCCB Moulded Case Circuit Breaker

    TOS1 series moulded case circuit breaker is one of products developed and manufactured by adopting international advanced technology. It is supplied with rated insulating voltage 550V and 800V and used for circuit of AC 50/60Hz, rated operating voltage AC 400V (or below), rated operating current up to 1600A for infrequent changing over and starting of the motors.The products conforms to IEC60947- 2 standard.
  • 550V 750V 1000V 125A 160A 250A DC MCCB Moulded Case Circuit Breaker

    550V 750V 1000V 125A 160A 250A DC MCCB Moulded Case Circuit Breaker

    FPVM DC MCCB Moulded Case Circuit Breaker is designed to distribute power and protect the circuit and power equipment against overload in solar system. It is apply to rating current 1250A or less,direct current rating voltage from 550VDC,750VDC,1000VDC and 1500VDC. Our DC MCCB according IEC60947-2, GB14048.2 standard.

Send your message to us:

Write your message here and send it to us